ISTIQ Noise Control Sdn Bhd
1, Jalan Utarid U5/17, Seksyen U5, Mahsing Integrated Industrial Park, 40150 Shah Alam, Selangor, Malaysia.
+603-7846 5188
+603-7846 5288
+603-7846 5288
+603-7842 7206
Acoustic Modular Panel
Acoustic Modular Panel
Quantity
Acoustic Modular Panel
ISTIQ Acoustic Modular Panels are available in modular forms and they come in with frame less, none welded and none bolted concepts. This unique design makes the whole enclosure to be installed at site fast and easy. Furthermore, it can easily dismantle and relocated, saving both time and money.
Due to the versatility of this paneling system, the modular panels can be used for designing from a small pump motor acoustic enclosure up to 2500 kW
Genset Room. The system can be used even to built 3 storey plant building.
Typical application can be applied on the following equipments: -
APPLICATIONS
ISTIQ Acoustic Modular Panels System is one of the most effective means for containment of excessive noise and for isolation of workers from the noise. Even where silencers are used, these can treat only the air-borne noise. The treatment of mechanical noise from the blower, motor etc. is beyond the scope of the silencer. Thus, in order to achieve low noise levels that are often specified, noise enclosures are often required.
By using ISTIQ Acoustic Modular Panels, acoustic enclosure can be designed acoustically to give the required noise attenuation. The unique interlocking system (male/female) provides a good seals without having any rubber or gasket thus, give the maximum transmission loss. A well designed enclosure can help reduce the noise to a specified noise limits.
By using ISTIQ Acoustic Modular Panels, acoustic enclosure can be designed acoustically to give the required noise attenuation. The unique interlocking system (male/female) provides a good seals without having any rubber or gasket thus, give the maximum transmission loss. A well designed enclosure can help reduce the noise to a specified noise limits.
Typical application can be applied on the following equipments: -
• Turbine Rooms
• Press Machines
• Compressors Room
• Pumps Room
• Generator Sets
• Control Rooms
• Sound Measuring Room
• Anechoic Room
• And many more...
CONSTRUCTION
ISTIQ Acoustic Enclosures are made of from high quality galvanized steel and perforated sheet. In between, acoustic infill (rockwool or fibre glass) is used to absorb noise. The thickness of these panels are available in 50mm, 75mm and 100 mm. Different acoustic infill and different thickness of metal sheet are
used depending on the application to ensure excellent performance and cost effectiveness without sacrificing quality.
Specific percentage of perforation of galvanized sheets, which hold the infill, is specially selected to give the optimum overall noise absorption coefficient.
Specific percentage of perforation of galvanized sheets, which hold the infill, is specially selected to give the optimum overall noise absorption coefficient.
Alternatively, materials such as zincanneal, mild steal or stainless steel can also be used to replace galvanized steel. For finishing, powder coating system is highly recommended. The painting system, thus can last up to 20 years depending on the type of powder coating to be used.
For more information:
CALL US NOW for inquiry at +603-7846 5188/+603-7846 5288 (Office) or 011-277 20340 (Whatsapp) or email at noisecontrol.istiq@gmail.com
For more information:
CALL US NOW for inquiry at +603-7846 5188/+603-7846 5288 (Office) or 011-277 20340 (Whatsapp) or email at noisecontrol.istiq@gmail.com